Contact Us


Whoops…Nothing found

Try other keywords in your search

Selecting Objects

 0 Minutes



Selecting Objects

Objects can be selected in two ways:

  • Clicking on the object in the Workspace.
  • Clicking on the object's name under the Project tab in the respective mode, which is
    • Screens for screens and LED screens
    • Mapping for projectors

When selected in the Workspace, screens turns yellow while selected projectors are marked by a yellow bounding box. Selecting objects in the Project tab does not highlight them in the Workspace, but their values can be changed in the Inspector.

Selected screens turn yellow


Note: Projectors can be selected and manipulated both on their housing and the projection plane.

Selected projectors are marked by a yellow bounding box

Selection Mode

The Selection Mode defines which objects can be selected in the Workspace. Changing the Selection Mode allows to also select, but not manipulate screens in Mapping mode. Selecting a screen can be necessary to assign outputs for LED screens.

To change the Selection Mode simply click the Selection Mode icon on the top right corner of the Workspace and choose the desired mode (Projectors or Screens). Each mode only allows to select the corresponding objects. It is possible to switch the mode with the keayboard shortcut F4.

Was this article helpful?